ATS-600
Smart device for removing
leftovers
The Schredder crushes leftovers of
EPS or XPS foam fast and easy into small pieces that can be packed
in bags and afterwards recycled. In this way new Styropor blocks
can be made out of the recycling material. Stryropor leftovers are
also used for improvement of the floor quality and as admixture
for concrete.
If
you use the Schredder AT-S 600, you will save precious space in
your workshop. When packed in bags, the bulky leftovers take little
space and can be easily transported.
Operating
mode
The
Schredder is used for chopping Styropor leftovers into pieces. With
the help of heated wires the Styropor piece is diced or cut to ribbons
with the size of 30x30mm.
The cutting material is put in the funnel. Then it goes down through
the heated wires. Depending on the thickness of the Styropor piece,
the material is cut into 30x30 mm big slices, dices or bars.
The funnel of the Shredder has the dimensions of 600x600mm. This
is also the maximum size of the cutting material that can be fed
into the funnel.
The leftovers fall in the collecting bag.
Technical
information
Name
Schredder AT- S 600 S with an exhauster
Funnel opening: 600x600 mm
Mesh work of the screen: 30x30 mm
Wire: RW- 40S
Wire resistance: 12,5
Connected load: 220 V
Input Power Shredder: 1540 W
Input Power Fan: 660 W
Fuse: 10 A
(Volumetric) capacity: 1m3
Throughput: 6m3/h
Schredder measurements ( W x D x H): 1040x1000x2230 mm
Filling volume ( W x D x H): 870x870x1020 mm
Wire length: 2x700 mm each
Operating
mode
The Schredder is used for chopping
Styropor leftovers into pieces. With the help of heated wires the
Styropor piece is diced or cut to ribbons with the size of 30x30mm
 |
|
.
The cutting material is put in the hopper. Then it goes down
through the heated wires. Depending on the thickness of the
Styropor piece, the material is cut into 30x30 mm big slices,
dices or bars.
The hopper of the Shredder has the dimensions of 600x600mm.
This is also the maximum size of the cutting material that
can be fed into the funnel.
The leftovers fall in the collecting bag.
|
TECnical
Data
| |
Name |
Shredder AT-S 600
S with exhauster |
| |
Size
of hopper port |
600 x 600 mm/ 1.96 x1.96 feet |
| |
Screen
sieving |
30 x 30 mm/ 0,98x0.98 feet |
| |
Wire |
RW - 40S |
| |
Wire
resistance |
12,5
Ohm/m |
| |
Input Power |
220 V |
| |
Power
rating shredder |
1540 W |
| |
Power
rating exhauster |
660 W |
| |
Fuse |
10 A |
| |
Capacity |
1 m³/ 35.28 cubic feet |
| |
Flow
rate |
6 m³/h |
| |
Schredder
measurements ( W x D x H) |
1040 x 1000 x 2230 mm |
| |
Filling
volume ( W x D x H) |
870 x 870 x 1020 mm |
| |
Wire
length |
je 2 x 700 mm |
Delivery and service
We deliver the machine directly to you (for an extra charge).
|